OXVA | VAPIN LOUD

OXVA XLIM ABT SERIES

OXVA XLIM ABT Cartridge UNITECH 3.0 – 3 Pack

Keep your compatible XLIM device ready for a fresh pod with the OXVA XLIM ABT UNITECH 3.0 Replacement Pods – 3 Pack at Vapin Loud. Each refillable cartridge combines a built-in mesh coil with top filling. Choose from four resistance options to suit your device and preferred draw. Anti-Burn features require a compatible ABT-enabled device and the correct settings.

PRODUCT HIGHLIGHTS

3 Pods Per Pack • Anti-Burn Technology Support • UNITECH 3.0 Mesh Coils • 0.4Ω / 0.6Ω / 0.8Ω / 1.2Ω • Top Filling • 2ml / XL Options

OXVA XLIM ABT UNITECH 3.0 – Product Overview

The OXVA XLIM ABT UNITECH 3.0 Replacement Pods – 3 Pack gives you three refillable cartridges for a compatible OXVA XLIM device. Replace the complete cartridge when its integrated coil wears out, then fill a fresh pod with suitable e-liquid and prime it according to OXVA’s instructions.

Each pod incorporates an integrated UNITECH 3.0 mesh coil, a convenient top-filling system and an upgraded design intended to help reduce e-liquid leakage.

The ABT cartridge range is designed to support OXVA Anti-Burn Technology. When used with a compatible ABT-enabled device such as the XLIM Pro 4, the system can monitor low e-liquid levels and provide refill reminders.

The cartridges are available in 0.4Ω, 0.6Ω, 0.8Ω and 1.2Ω resistance options, supporting different mouth-to-lung (MTL) and restricted direct-to-lung (RDL) vaping configurations.

Vapin Loud lists both 2ml and XL variants. The exact capacity depends on the selected product option.

Each retail pack contains three replacement cartridges. The vape device and e-liquid are sold separately.

OXVA XLIM ABT Cartridge Key Features

Anti-Burn Technology Support

The ABT cartridge supports smart e-liquid monitoring when paired with a compatible ABT-enabled device. This can help prevent the coil from firing when the pod is running low on e-liquid.

Smart Refill Alerts

On supported devices, the Anti-Burn system can display a refill reminder when e-liquid reaches a low level, helping users identify when the cartridge needs attention.

Automatic Low-Liquid Cut-Off

With ABT enabled on a supported device, power output can be interrupted when the e-liquid level becomes too low. This is designed to reduce accidental dry-coil operation.

UNITECH 3.0 Mesh Coil Technology

The built-in UNITECH 3.0 mesh coil is designed to support even e-liquid heating and consistent vapour production during normal use.

Convenient Top-Filling System

The refillable cartridge uses a top-filling port with a secure silicone stopper, allowing e-liquid to be added without removing a separate coil.

Enhanced Leak-Resistant Design

The upgraded pod construction incorporates sealing features designed to help minimise e-liquid seepage during normal handling and operation.

Four Coil Resistance Options

Choose between 0.4Ω, 0.6Ω, 0.8Ω and 1.2Ω integrated mesh coil options to suit the compatible device and preferred vaping style.

Three Pods Per Pack

Each pack contains three refillable XLIM ABT UNITECH 3.0 cartridges in the selected resistance and capacity.

How OXVA Anti-Burn Technology Works

Smart Liquid-Level Monitoring

OXVA Anti-Burn Technology is designed to help reduce dry hits by detecting low e-liquid levels through a compatible ABT cartridge and device.

When the pod runs low, a supported device such as the XLIM Pro 4 can display a refill reminder and stop firing until the liquid level is addressed.

Anti-Burn functionality requires:

A compatible OXVA XLIM ABT cartridge
A device that supports ABT liquid-level detection
ABT functionality enabled on the device
Correct cartridge installation

Important: ABT cartridges may operate as standard refillable pods in other compatible XLIM devices, but the smart refill alert and automatic cut-off features will not necessarily be available.

OXVA XLIM ABT UNITECH 3.0 Resistance Options

Select the correct resistance for the compatible device and preferred vaping style.

Resistance	Recommended Wattage	Vaping Style
0.4Ω	26–30W	Restricted Direct-to-Lung (RDL)
0.6Ω	20–25W	RDL / MTL
0.8Ω	12–16W	Mouth-to-Lung (MTL)
1.2Ω	10–12W	Tighter MTL

Always follow the manufacturer's recommended wattage for the selected resistance. Not all XLIM devices support every resistance or power level.

Available OXVA XLIM ABT Cartridge Variants

Vapin Loud lists the following eight variants:

0.4Ω – 2ml

0.4Ω – XL

0.6Ω – 2ml

0.6Ω – XL

0.8Ω – 2ml

0.8Ω – XL

1.2Ω – 2ml

1.2Ω – XL

Capacity Notice: The 2ml and XL options are separate capacity formats. Check the selected option and supplied packaging for its exact capacity before ordering; no specific capacity is stated here for the XL version.

OXVA XLIM ABT Pod Compatibility

These cartridges are designed for compatible OXVA XLIM devices. Supported models include:

OXVA XLIM Pro 4
OXVA XLIM 4
OXVA XLIM Pro 3
OXVA XLIM 3 Ultra
OXVA XLIM Pro 2
OXVA XLIM SQ Pro 2
OXVA XLIM Go 2
OXVA XLIM Go
OXVA XLIM Go Lite

Compatibility and ABT functionality are separate considerations. Some compatible devices use these cartridges without smart Anti-Burn features. Always confirm the exact device model and supported pod resistance. XLIM C and NeXLIM use different cartridge systems.

OXVA XLIM ABT UNITECH 3.0 Specifications

Brand	OXVA
Product Name	XLIM ABT Cartridge UNITECH 3.0
Product Type	Refillable Replacement Pod Cartridge
Pack Quantity	3 Cartridges
Resistance Options	0.4Ω / 0.6Ω / 0.8Ω / 1.2Ω
Coil Technology	UNITECH 3.0 Built-In Mesh Coil
Anti-Burn Support	Yes, with Supported ABT Devices
Smart Refill Alert	On Compatible ABT-Enabled Devices
Low-Liquid Auto Cut-Off	On Compatible ABT-Enabled Devices
Filling System	Top Fill
Capacity Options	2ml / XL
Coil Replacement	Replace Complete Cartridge
Vaping Styles	MTL / RDL, Depending on Resistance
E-Liquid Compatibility	Manufacturer-Compatible Nicotine Salt / Freebase E-Liquids
E-Liquid Included	No
Vape Device Included	No
Retailer	Vapin Loud

Suitable E-Liquids for OXVA XLIM ABT Pods

The XLIM ABT UNITECH 3.0 cartridges are designed for suitable refillable pod e-liquids, including:

50/50 VG/PG e-liquids
Compatible nicotine salt e-liquids
Compatible freebase nicotine e-liquids

E-liquid suitability depends on the selected coil resistance, device output and manufacturer's recommendations. E-liquid is not included with these pods.

How to Fill OXVA XLIM ABT UNITECH 3.0 Pods

Step 1 – Check Compatibility: Confirm the cartridge resistance and compatibility with your OXVA XLIM device.

Step 2 – Open the Filling Port: Locate and open the silicone stopper on the pod's top-filling section.

Step 3 – Add E-Liquid: Fill the pod with suitable e-liquid through the designated port. Avoid overfilling and do not pour liquid into the central airflow channel.

Step 4 – Close the Port: Securely close the stopper and inspect the cartridge for leaks.

Step 5 – Allow the Coil to Prime: Follow OXVA's priming guidance. UNITECH 3.0 is advertised with a quick-priming design; ensure the wick is saturated before first use.

Step 6 – Install the Cartridge: Insert the pod into the compatible XLIM device.

Step 7 – Select Suitable Settings: Use a wattage appropriate for the installed resistance. If supported, enable ABT according to the device manual.

When Should You Replace an OXVA XLIM ABT Pod?

Replace the cartridge when:

Flavour quality noticeably deteriorates.
The coil produces a persistent burnt taste.
Vapour output becomes inconsistent.
The pod becomes cracked or damaged.
Persistent leakage occurs despite correct filling.

Pod lifespan varies with e-liquid composition, power settings and frequency of use. Anti-Burn protection helps reduce dry-coil operation but does not prevent normal coil wear.

What's in the OXVA XLIM ABT 3 Pack?

3 × OXVA XLIM ABT UNITECH 3.0 Refillable Cartridges

All three cartridges in a pack are supplied in the selected resistance and capacity. A vape device and e-liquid are not included.

Frequently Asked Questions

What are OXVA XLIM ABT UNITECH 3.0 cartridges?

They are refillable replacement pods with built-in UNITECH 3.0 mesh coils and support for OXVA Anti-Burn Technology on compatible devices.

How many cartridges are included?

Each pack contains three refillable replacement cartridges.

What resistance options are available?

The range includes 0.4Ω, 0.6Ω, 0.8Ω and 1.2Ω options.

Are OXVA XLIM ABT pods refillable?

Yes. The cartridges feature a top-filling system and integrated mesh coils.

Do these pods work with the OXVA XLIM Pro 4?

Yes. The XLIM Pro 4 is designed to support compatible XLIM ABT cartridges and their Anti-Burn functionality.

Do Anti-Burn features work with every XLIM device?

No. Smart refill alerts and low-liquid cut-off require a compatible ABT-enabled device. On other supported XLIM devices, the cartridges may operate as standard pods.

What is the difference between 0.4Ω and 1.2Ω?

The 0.4Ω option is intended for higher-output RDL vaping, while 1.2Ω is designed for lower-output, tighter MTL vaping.

What is the recommended wattage for 0.6Ω?

The recommended range is approximately 20–25W.

What is the recommended wattage for 0.8Ω?

The recommended range is approximately 12–16W.

Can I replace the coil separately?

No. The mesh coil is integrated into the cartridge. Replace the complete pod when required.

What is the difference between 2ml and XL?

They are separate capacity formats in the product selector. The 2ml option has a stated 2ml capacity; check the XL option and packaging for its exact capacity before ordering.

Do these pods contain nicotine?

No. The refillable cartridges are supplied empty. Nicotine content depends on the e-liquid added separately.

Where can I buy OXVA XLIM ABT replacement pods?

Choose your required resistance and capacity here at Vapin Loud. Check the selected option for current retail pricing and availability.

EXPLORE RELATED PRODUCTS

4 Related Vape Products

Explore the compatible OXVA XLIM Pro 4 kit and other rechargeable vape products available at Vapin Loud. Other brands use different replacement pod systems.

OXVA

XLIM PRO 4 KIT

Compatible OXVA XLIM Pro 4 vape kit featuring Anti-Burn Technology.

View Product →

ASPIRE

GOTEK PRO 2 KIT

Aspire Gotek Pro 2 rechargeable refillable pod vape kit.

View Product →

ASPIRE

GOTEK V2 PODS

Aspire Gotek V2 refillable replacement pods. Not compatible with OXVA.

View Product →

VAPORESSO DOJO

BLAST 10K FRESH KIT

Dojo Blast 10K FRESH rechargeable pod vape kit.

View Product →

Explore More Vape Products

Browse rechargeable vape kits, replacement cartridges and accessories at Vapin Loud.

Browse All Products →

VAPIN LOUD

OXVA XLIM ABT UNITECH 3.0 Replacement Pods

Find the replacement pods for your compatible XLIM setup at Vapin Loud. These three-packs offer UNITECH 3.0 integrated mesh coils, top filling and four resistance options. Smart refill alerts and low-liquid cut-off depend on a supported ABT-enabled device.

Check your chosen option for current retail pricing and stock. Vapin Loud serves customers online and at our Plumstead, Eltham, Welling, Crayford and Rochester/Hoo shops.

Important Information: This product contains empty refillable replacement cartridges only. A vape device and e-liquid are not included. Anti-Burn Technology requires a compatible ABT-enabled device and correct settings. The cartridges do not eliminate all risk of dry hits or normal coil wear. Intended for adults aged 18 and over. Nicotine-containing e-liquids are highly addictive and are not intended for non-smokers. Keep vaping products out of reach of children and pets. Check capacity and device compatibility before use, and follow the supplied filling, handling and disposal instructions.

Oxva XLIM ABT Cartridge UNITECH 3.0 3pcs/pack