Skip to content
Free Royal Mail 24 Delivery on all orders
Free Royal Mail 24 Delivery on all orders
How to Keep Your Vape Coil from Burning Out - What to Know

How to Keep Your Vape Coil from Burning Out - What to Know

How to Keep Your Vape Coil from Burning Out - What to Know

Vaping seems to be the craze these days. Every vaper varies as they have their own way to enjoy it. Some use sleek pens, while others use e-cigarettes. Some even manually craft the bod mod kits while others thread their wicks.

While there exist such differences, one thing in common that every vaper shares is the need to replace the coils. If you do not already know, a vape coil draws power from the battery to produce heat and vaporize e-liquid. The problem is, coils do burn out, leaving an undesirable taste to your vaping experience.

The goal is to ensure that your vape's coil will last as long as possible. To achieve this, we'll provide some vaping tips on how to keep your coil from burning out:

Coil Versus Wick

When talking about 'burn out,' first consider the differences between a coil and a wick.

A coil is the cylindrical metal object that screws onto a mod or into a pen. It's the vape component that heats up and turns the e-liquid into vapour. On the other hand, the wick is the twist of cotton that soaks up e-liquid, allowing it to be heated to the point of vapour. The wick is found inside coil parts because of the heating element. 

Both the cotton and the heating coil will wear out and need replacement. If either the wick or the coil burns out, you'll need to replace the part and buy a new coil. 

Wick-Priming Before Vaping

It is a good practice to prime your wick before you start vaping. If you don't do so, you will scorch coil after coil by accident in the first few puffs. Below are two ways to prime a vape wick: 

Drip Prime: This is the most common method. All you have to do is to deposit a few drops of e-liquid directly onto the cotton coils and saturate them until they're entirely moist. Do this with the coils in or out of a tank – filled or empty.

Flow Prime: This is an alternate method. All you have to do is to build your pen or mod box and fill the tank. Breathe in through the drip tip without firing the button. In the right rigs, this will pull e-liquid up through the coils. As a result, this will saturate them evenly through the tank and coil design.

Checking the E-liquid Level

Checking the e-liquid level of your vape is paramount. Soaking in the tank of e-liquid can make the coil remain saturated. As the level drops, chances are the less of the coil is soaking under the surface level. This means that it is at greater risk of drying out and scorching at hotter temperatures. 

That said, make sure to top up your vape with e-liquid every time the level gets low. This is one way to keep your wick soaked. Clean it out and start anew if a tank sits half-full for long.  

Other Coil Considerations

The steps given above are a few vape tips to ensure that your coil won't burn out. Apart from these, consider the following:

Never fire a dry cotton wick
Break-in new coils slowly
Look for fast-wicking tanks
Turn down the temperature
Don't chain-vape your wick dry

Consider all these tips to ensure that your coil will last for as long as possible.

If you are looking for vape coil, come visit Vapin Loud today! With a wide range of products, you won't be disappointed.

Previous article Mods & Pods: The Differences Between These Two Vape Devices

Leave a comment

Comments must be approved before appearing

* Required fields